Page 3
Precautions Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation.
Page 4
source is 12VDC. Be sure to connect the proper + / - polarity and voltage, as incorrect polarity or too high a voltage will likely cause the camera to fail, and such damage is not covered by the warranty. Mounting. Use care in selecting a solid mounting surface which will support the weight of the camera plus any wind, snow, ice or other loading, and securely attach the camera to the mounting surface using screws and anchors which will properly support the camera.
Page 5
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
As MoniVue System is bundled with a video recorder and four-camera, we will introduce the two products separately. The content below describes the hardware and software of the 1080p FHD camera S200. For more details about the video recorder, please refer to the User’s Manual of MoniVue Video Recorder.
S200 1.1 Packing List Camera Body x 1 User Manual x 1 Mounting Bracket x 1 Mounting Ring x 1 Mounting Screw x 2 Plastic Anchor x 2 Mac Address Sticker x 1 ...
S200 1.2 Features 1080p Full HD with high flexibility and performance for astounding image 1/2.9" Sony 2.24MP CMOS sensor, delivering amazing high sensitivity Special design, easy installation and operation D-WDR to improve the visibility under high contrast scene ...
S200 3. Installation 3.1 Installation and Adjustment Ceiling Mount / Wall Mount 1. Put the Mounting Bracket on the wall or ceiling to mark where to insert the Mounting Screws. Drill two holes on the wall or ceiling according to the marks and insert the supplied Plastic Anchors into the holes.
Page 11
S200 3. Inset the camera into the Mounting Bracket. 4. Use the Mounting Ring to fix the camera. Mounting Ring...
Page 12
S200 5. Connect the camera to a Camera IN cable of the MoniVue Video Recorder for viewing the video image while adjusting camera angles. To configure camera settings, use the OSD Menu Joystick. Video Output Camera IN cable 6. Slide the adjusting screw or rotate the Mounting Bracket to adjust the angle of the camera.
Page 13
S200 Embedded Mount 1. Drill a Φ20.4 ~ 21.4mm / 0.80" ~ 0.84" hole on the wall or ceiling. Wall or ceiling 20.4 ~ 21.4mm / 0.80" ~ 0.84" 2. Insert the camera into the hole.
Page 14
S200 3. Use the Mounting Ring to fix the camera. Camera Mounting Ring 7. Connect the camera to a Camera IN cable of the MoniVue Video Recorder for viewing the video image. To configure camera settings, use the OSD Menu Joystick.
S200 4. Configuration in the OSD Menu You can use the OSD Menu Joystick on the MoniVue Video Recorder to configure camera settings in the OSD menu. Please see below details of the camera’s OSD menu structure: Main Menu Sub Menu Sub Menu / Function...
Page 16
S200 Select Area1, Area2, Area3, Area4 Display Position, Size,↑,↓,→,← Black Mask On, Off Backlight HSBLC Level 0 – 100 All Day Model Night AGC Level 0 – 255 Default AWC→SET Indoor White Balance Outdoor Blue 0 – 100 Manual 0 – 100 D→N (Delay) 0 –...
Page 17
S200 2DNR Middle, Low, Off, High Mirror Off, Mirror, V-flip, Rotate Live DPC AGC level 0 – 255 Level 0 – 100 Position, Pos / Size Size,↑,↓,→,← 1. Close the Iris 2. Place a black White DPC Start paper upright in front of the lens 3.
Page 18
S200 Level 0 – 10 Sharpness Auto Start AGC 0 – 255 End AGC 0 – 255 User, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, Gamma 0.75, 0.80, 0.85, 0.90, 0.95, 1.00 Adjust Monitor Blue Gain 0 – 100 Red Gain 0 –...
S200 5. Specifications Pickup Device 1/2.9" Sony 2.24MP CMOS Day/Night Ext, Auto, Color, B/W NTSC / PAL (Can be Video Format UTC Function Supported switched via OSD) Lens Type 2.7mm, F2.2 13-Language Languages Effective 1920 (H) x 1080 (V) 2DNR...
Page 20
FAX: +81 3 5625 8189 www.everfocus.com www.everfocus.co.jp sales@everfocus.com info@everfocus.co.jp Ihr EverFocus Produkt wurde Your EverFocus product is designed and entwickelt und hergestellt mit manufactured with high quality materials qualitativ hochwertigen Materialien and components which can be recycled und Komponenten, die recycelt und and reused.