Table of Contents
Advertisement
1. Rotate the mode dial to
enter the Wi-Fi selection interface.
2. Press the [
]/[
and set options.
「
•
Settings」：
Customize the Wi-Fi settings for the
camera system.
•
「Station」：
Use the Station Mode to connect to
a "Personal Hotspot" created by your
mobile device.
「AP Mode」：
•
In AP mode, the camera will act as
an access point enabling another
Wi-Fi device to connect to it.
Rotate the mode dial to disconnect.
and then
] button to select
AP Mode
This camera may connect with your smart
device through Wi-Fi.
Settings of Camera:
1. Select
and press the
enter the setting interface.
2. Press the [
select options to be adjusted, and press
the
button to enter the option setting
interface.
AP mode
Setting pre-connected device for the
following serial number:
SSID: KODAK PIXPRO AZ651_XXXX
WPA2-PSK: XXXXXXXX
Refresh
• Refresh: Create a new WPA2 PSK
password.
• Back: Back to previous page.
button to
]/[
] button to
Back
37
Advertisement
Table of Contents
