Power Supply Installation - Antec LanBoy Air User Manual

9. Slide the motherboard tray halfway into the chassis along the rails. Connect your drive bay devices to the
motherboard and then slide the motherboard tray the rest of the way into the chassis. Connecting devices when
the motherboard tray is halfway in gives you more space to work with when you make the connections.
10. Replace the rear panel and secure it using the original five screws.
2.7 P S
OWER UPPLY
1. Slide the PSU into the PSU mount and attach the PSU to the PSU mount with the screws provided (Figure
27)
Note: Power supplies with fans on the bottom of the power supply will need to be mounted so that the fan
is facing the top of the chassis, unless the power supply is installed in the top of the chassis. The
LanBoy Air provides mounting holes for power supplies with standard mounting layouts to be
installed right side up or upside down.
Insert the PSU mount with PSU into the chassis along the rails. Secure the PSU mount with the thumbscrew.
2.
Connect the PSU connectors to your devices.
3.
17
All manuals and user guides at all-guides.com
Figure 26 – Reinserting the motherboard tray
I
NSTALLATION
Figure 27 – PSU in mount with
screws identified