Table of Contents
Advertisement
PYRO START
| Lightweight wheelchair
3.4. Scope of supply
The contents comprise the following main components:
•
wheelchair, pre-assembled
•
1 pair of leg rests
•
1 instruction manual
•
1 air pump (only for pneumatic tyres)
12
Lightweight wheelchair |
4. Assembly/adjustments
4.1. Setting up the wheelchair
To unfold your wheelchair after unpacking, please move close to the
wheelchair.
•
With one hand, grasp the armrest or the seat tube on one side of the
wheelchair and tip it towards you (Fig. 2).
•
With the other hand, push the crossbrace apart until the seat tube
rests fully in the plastic mounting (Fig. 3).
•
The seat cushion must be fully extended.
•
Activate the parking brakes on the right and left drive wheels.
•
Clip in the leg rests.
•
Now you can sit down.
4.2. Folding up the wheelchair
To fold up your wheelchair, first swing the foot plates upwards (Fig. 4).
•
Move close to the wheelchair.
•
Grip the seat cushion at the front and back and pull it upwards (Fig.
5). To stow the wheelchair in a car, you can easily remove the rear
wheels via the quick-release axle.
.
RISK OF ENTRAPMENT! Make sure that you do not
grip the seat tube.
Bischoff & Bischoff GmbH | 04.07.2018
PYRO START
2
3
4
5
13
Advertisement
Table of Contents
