Summary of Contents for Sharper Image HP5990A
- Page 1 HP5990A WIRELESS HEADSET FOR SENIORS User Manual Please Read This Manual Carefully Before Use...
- Page 2 INTRODUCTION This WIRELESS CHIN HEADSET uses latest wireless technology, and enables to improve the hearing aid capability that may required by the elderly people to enjoy crystal sound stereo music and TV sound anywhere inside your home. Simply connect the transmitter to a desired audio source: DVD player, CD player, TV set, Hi-Fi system, or iPod.
-
Page 3: Component Part List
COMPONENT PART LIST Headset Receiver Transmitter In-Ear Headphone RCA Adapter Cable Audio Cable (both ends with 3.5 mm stereo plug) Power Adaptor 6.3 mm to 3.5 mm Adapter Plug (Optional) SCART Adapter (Optional) - Page 4 Function Identification: Headset Receiver 3.5mm Headphone Socket LED Indicator of Power/Signal Volume Control Mute Button for Verbal Communications Microphone Auto Tune Button for Frequency Channel Sound Balance Control (Left/Middle/Right) Belt-Clip Battery Charging Contact 10. Power On/Off...
- Page 5 Function Identification: Transmitter Charging Cradle Tone Clarity LED Indicator of Battery Charge LED Indicator of Audio Signal LED Indicator of Power LED Indicator of Treble Sound LED Indicator of Bass Sound Audio In Frequency Channel Selector (CH1 or CH2) 10. Power ON/OFF DC In...
-
Page 6: Installation
INSTALLATION TRANSMITTER Connect the Power Adapter to the DC IN input Socket located on the transmitter rear panel. Connect the Power Adapter provided to an Electrical Outlet. RCA Adapter Cable, Audio Cable, 6.3 mm to 3.5 mm Adapter Plug, and SCART Adapter are provided for various type of connection to your Audio Source (e.g. -
Page 7: Operation
OPERATION Switch on the Audio Source (TV set or audio component) that the Transmitter is connected to. The Signal LED Indicator will glow constantly. Plug the supplied In-Ear Headphone to 3.5mm Headphone socket on the Receiver. Select the On/Off Switch in the Headset Receiver to ON position, then the Green Signal LED Indicator glows. - Page 8 WARNING: Never attempt to recharge conventional dry cells. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like Never use another type of battery or non-rechargeable batteries to replace the rechargeable batteries supplied.
-
Page 9: Technical Specifications
TECHNICAL SPECIFICATIONS Transmission mode : UHF Stereo Carrier frequency : 900MHz Operating voltage : Transmitter : 8V 400mA Receiver : 3.7 V, 350 mA Lithium Polymer Battery Frequency response : 30 Hz – 15 KHz Distortion : <1% Signal-to-noise ratio : >60 dB Range : Up to 30 meters (open area) - Page 10 This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Modification of this device to receive cellular radio-telephone service signals is prohibited under FCC rules and Federal Law.