Activating The Onplus Network Agent With The Cisco Onplus Portal - Cisco ON100 Network Agent Quick Start Manual

Status LEDs
Restart
1 Blinking Green
STATUS
2 Blinking Amber
1 2
Ready for Activation / Device Online, No OnPlus Portal Connectivity
1 Steady Green
STATUS
2 Steady Off
1 2
Normal Operation (Activated, Online)
1 Steady Green
2 Steady Green
Activating the OnPlus Network Agent with
7
the Cisco OnPlus Portal
To activate the Cisco OnPlus Network Agent, follow these steps.
On the computer connected to the customer LAN, open a Web
S 1
TEP
browser and log in the Cisco OnPlus Portal at
www.cisco-onplus.com.
If you have not yet created an entry for this customer, go to the
S 2
TEP
Partner Account Overview page and click + Add Customer. After
you add the customer, an Activation ID is generated.
Navigate to the customer's Status page on the portal. The status
S 3
TEP
will be Awaiting Activation, and the customer's Activation ID is
displayed.
Cisco ON100 Network Agent Quick Start Guide
Description
Restarting the OnPlus Network Agent.
The OnPlus Network Agent restarts after
a normal reset, factory reset, or software
upgrade.
If the OnPlus Network Agent has not yet
been activated, this LED pattern means
that the agent software is running and the
device is ready for activation.
If the OnPlus Network Agent has already
been activated, this LED sequence means
that the OnPlus Network Agent software
is running, but the device does not have
connectivity to the OnPlus Portal.
When both status LEDs are lit Steady
Green, it means that the OnPlus Network
Agent is activated, online, and is
communicating with the OnPlus Portal.
This is the normal mode of operation.
9