To Copy Reservations; To Confirm Reservations; To Deactivate And Reactivate Weekly Timer Operation; To Delete Reservations - Daikin CTXM15N2V1B Operation Manual

8 Press or to select the desired temperature.
Note: The set temperature for the weekly timer is displayed only
when setting the weekly timer mode.
INFORMATION
The temperature can be set between 10~32°C on the user
interface. In cooling and automatic operation mode, the
unit will operate at minimum 18°C even if is set at
10~17°C. In heating operation mode, the unit will operate
at maximum 30°C even if is set at 31~32°C.
9 Press .
Result: The temperature and time are set for the ON timer. The
time is set for the OFF timer. The timer lamp lights orange.
Result: A new reservation screen will appear.
10 Repeat the previous procedure to set another reservation or
press to complete the setting.
Result: is displayed on the LCD.
Note: A reservation can be copied with the same settings to another
day. Refer to "4.10.2 To copy reservations" on
4.10.2

To copy reservations

A reservation can be copied to another day. The complete
reservation of the selected day of the week will be copied.
1 Press .
2 Press or to select the day of the week to be copied.
3 Press .
Result: The reservation of the selected day of the week will be
copied.
4 Press or to select the destination day.
5 Press .
Result: The whole reservation is copied to the selected day and the
timer lamp lights orange.
Note: To copy to another day, repeat the procedure.
6 Press to complete the setting.
Result: is displayed on the LCD.
Note: To change the reservation setting after copying, refer to
"4.10.1 To set Weekly timer operation" on
4.10.3

To confirm reservations

You can confirm if all reservations are set to your needs.
1 Press .
Result: The day of the week and the reservation number of the
current day are displayed.
CTXM15+FTXM20~71N2V1B
Daikin room air conditioner
3P485919-8K – 2018.09
page 9.
page 8.
2 Press or to select the day of the week and reservation
number to be confirmed and check the reservation details.
Note: To change the reservation setting, refer to
Weekly timer operation" on page 8.
3 Press to exit the confirmation mode.
4.10.4 To deactivate and reactivate Weekly timer
operation
1 To deactivate the Weekly timer, press
is displayed on the LCD.
Result: disappears from the LCD and the timer lamp goes
off.
2 To reactivate the Weekly timer, press
Result: The last set reservation mode will be used.
4.10.5

To delete reservations

To delete individual reservations
Use this function if you want to delete a single reservation setting.
1 Press .
Result: The day of the week and the reservation number are
displayed.
2 Press or to select the day of the week to be deleted.
3 Press .
Result: , , and
4 Press or and select "blank".
Result: The setting will change as follows:
5 Press .
Result: The selected reservation is deleted.
6 Press to exit.
Result: Remaining reservations will be active.
To delete a reservation for each day of the week
Use this function of you want to delete all reservation settings for
one day of the week. This can be used in confirmation or setting
mode.
1 Press or to select the day of the week to be deleted.
2 Hold for about 5 seconds.
Result: All reservations for the selected day will be deleted.
To delete all reservations
Use this function if you want to delete all reservations for all days of
the week in one go. This procedure CANNOT be used in the setting
mode.
1 Hold for about 5 seconds while in the default display.
Result: All reservations will be deleted.
4.11

Wireless LAN connection

The customer is responsible for providing:
4 Operation
"4.10.1 To set
while
again.
blink.
Operation manual
9