Table of Contents
Advertisement
Anti−Friction Bearing
1.
Air Deflector
2.
Back End Bearing Seal / Slinger
3.
Back End Bracket
4.
Lock nut (Not required for all designs)
5.
Lock washer (Not required for all designs)
6.
Back End Bearing
7.
Back End Bearing Inner Cap
8.
Back End Thermal Barrier
9.
Stator / Frame Assembly
10. Lifting Provisions
11. Conduit Box Assembly
12. Rotor / Shaft Assembly
13. Front End Thermal Barrier (Not required for all designs)
14. Front End Inner Cap
15. Inboard Snap Ring (Not required for all designs)
16. Front End Bearing
17. Outboard Snap Ring (Not required for all designs)
18. Front End Bracket
19. Front End Bearing Seal (Not Required For All Designs)
20. Fan
21. Fan Cover
A−2 API Documentation
This Manual:http://www.manuallib.com/baldor/mn409-large-ac-motors-handbook.html
MN409
Advertisement
Table of Contents
