Tripp Lite N484-00U Quick Start Manual

Quick Start Guide
High Density Copper/Fiber Cassette Solutions
Modular Cassette Enclosures*
Models: N484-00U (1-Cassette Capacity), N484-01U (4-Cassette Capacity)
Cassettes*
Models: N484-1M24-LC12, N484-2M12-LC12, N484-3M8-LC12, N484-3M8L12S, N484-2M24-6M12, N484-12LC,
N484-12M12, N484-12M24, N484-12RJ
* This Quick Start Guide covers installation of all N484-Series enclosures and cassettes.
Any new models, even if not listed above, will include this Quick Start Guide and can be installed by following its instructions.
Español 3 • Français 5 • Русский 7
Installing the Cable Management Bracket:
The panel rails on the back of the N484-01U enclosure contain mounting notches that allow the cable management bracket to be installed on
the top or bottom of the rails. Choose the top or bottom notches, insert the bracket into the notches, and slide the bracket inward to secure it
into place.
Installing the Panel Shield Bracket:
The N484-01U contains a shield bracket that attaches to the front of the enclosure. Mounting holes are located on the right and left front panel
rails for bracket attachment. To attach the bracket, pull on the pull tabs found on each side of the bracket to move the connected pins outward.
Then insert the bracket into the enclosure. Once the pins are lined up with the mounting holes on the panel rail sides, release the pull tabs to
lock the bracket into place. The bracket slides up and down to allow access to the enclosure or to shield it from contact.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
1