Haier HWF75DW1 User Manual page 12

Leave
Before the next use,carefully check power cord,water inlet
Choose the best Detergent
Universal Colour
- -
Wool
L/P L/P
Mix
L/P L/P
Synthetic
L/P L/P
Cotton
L L
Express 15'
-
-
Delicate
Detergent
L q i u d i
L
P Powder
o Optional
- No
If using liquid detergent, it is not recommended to activate the delayed start. Refer to the
detergent manufacturers packaging for recommended dosage!
info: Modern washing detergents at low temperatures.
Special
Delicate Softener
-
L O
-
-
O
-
O
L
- -
O
- -
O
-
L O
Temperature range in °C
o c d l - 0 6
40 - 90
---
---
22
23
Display code
C o d e C a u e s
Auto Automatic
Lo Weighing the laundry load in
HALF
the drum.
FULL
HI
1:25 Remaining wash cycle time.
19:30 Remaining delay start time
Lock
Door cannot be opened due to
water level or hot water in the
drum.
End End of cycle.
E1 Drainage error, water not emptied. Check drain hose for blockage and that it is
E2 Lock – error with door
E4 Water level not reached after 8
minutes.
E8 Water protective level - error.
F3 Temperature sensor - error.
F4 Heating error (Appears at the end of
F7 Motor - error.
Fb Water overflow.
FA Water level sensor error.
FC Electronic control - error.
Unb Unbalanced load and not able to
spin.
S l o t u o i n
load detection.
Laundry weight detection in progress, please
wait until program cycle time is displayed.
Please wait until program cycle time is
displayed: Lo = small load;HALF = half load;
FULL = optimized weight load;
HI = full load.
Refer to display symbol on page 9.
Likely showing the delay start operation.
Refer to display symbol on page 9
Wait for the program to end or cancel the
program and select the Spin/Drain program.
In case there is still hot water in the drum,
to avoid scalding , select the Handwash
program and leave it to wash for several
minutes then select the Spin/Drain program.
This should allow the drum to cool down.
properly installed.
Shut the door properly.
Check if water supply and water pressure
is normal.
Drain hose is self-syphoning.
Auto release.Otherwise contact the
af ter sales service.
Contact the After sales service.
Contact theAfter sales service.
a cycle . )
Contact theAfter sales service.
Close tap immediately.
Contact theAfter sales service.
Contact theAfter sales service.
Contact theAfter sales service.
Check and balance the laundry load in the
drum. Also reduce the load if too heavy.
Restart with a spin program.