Installing the Product
Important Notes on Installation
• When carrying the product, lift the product holding the indents on both lower sides of the
product.
• Install the product horizontally.
• Make sure that the product is not subjected to any impact or vibration.
• Do not place the product near any magnetic fields to avoid decreasing the MICR recognition
rate. Especially, when you install the product near a display device, check the recognition rate
of the MICR reader.
• Leave enough space around the product to open the covers, the pocket guide, and the ASF
guide.
• To prevent a paper jam, do not prevent paper from being ejected from the paper exit.
• Make sure cords and foreign objects are not caught in the product.
• Do not put any food or drink on the product case.
• Remove the cushions in the product and fixing tape before use.
Chapter 2 Setup
2
51