Performing The Inhalation - Pari LC SPRINT 023B8001 Instructions For Use Manual

3.3 Performing the inhalation

Before the patient starts inhaling, ensure that all parts are
firmly connected to each other.
Perform inhalation until the medication is used up (indicated by
a change in the sound of the nebuliser).
Several drops of medication will remain in the nebuliser after
inhalation.
Information on using a
nebuliser with PIF­Control­
System:
The PARI PIF­Control­System in
the nebuliser upper section re­
stricts the inflow of air and so cre­
ates increased inspiratory resist­
ance. It is used to help patients to
learn slow, controlled inhalation. If
you notice increased resistance
when breathing in during a treat­
ment session, try to inhale more
slowly, until you no longer feel the
increased resistance. In this way,
you will improve the amount of
medication that is delivered to the
lower respiratory tract.
• Connect the connection tubing to the compressor and
switch the compressor on.
– 43 –
en