Power; Table 2 Table Of Various Fluids And Their Properties - Fluke 7009 User Manual

Table 2 Table of various fluids and their properties.

Fluid Lower
(# = Fluke Part Temperature
No.) Limit*
Halocarbon 0.8 –100°C (v)** 70°C (e)
#5019
Methanol –96°C (fr)
Water 0°C (fr)
Ethylene –30°C (fr)
Glycol—50%
#5020
Mineral Oil No.7 10°C (v)
#5011
Silicone Oil Type –40°C (v)**
200.05 #5010
Silicone Oil Type –30°C (v)**
200.10 #5012
Silicone Oil Type 10°C (v)
200.20 #5013
Silicone Oil Type 30°C (v)
200.50 #5014
Silicone Oil Type 70°C (v)
550 #5016
Silicone Oil Type 80°C (v)
710 #5017
Silicone Oil Type 66°C (v)
210-H
Heat Transfer 180°C (fr)
Salt
#5001
*Limiting Factors — b - boiling point
= closed cup
**Very low water solubility, ice will form as a slush from condensation below freezing.
8.3
Upper
Temperature Flash Viscosity
Limit* Point (centistokes)
NONE 5.7 @ –50°C
0.8 @ 40°C
0.5 @ 70°C
10°C (fl,cc) 12°C 1.3 @ –35°C
0.66 @ 0°C
0.45 @ 20°C
95°C (b) NONE 1 @ 25°C
0.4 @ 75°C
90°C (b) NONE 7 @ 0°C
2 @ 50°C
0.7 @ 100°C
166°C (fl) 168°C 15 @ 75°C
5 @ 125°C
130°C (fl, cc) 133°C 5 @ 25°C
209°C (fl, cc) 211°C 10 @ 25°C
3 @ 135°C
230°C (fl, cc) 232°C 20 @ 25°C
278°C (fl, cc) 280°C 50 @ 25°C
230°C (fl, cc) 232°C 50 @ 70°C
300°C (fl, oc) 10 @ 104°C
300°C (fl, oc) 302°C 50 @ 80°C
7 @ 204°C
313°C (fl, oc) 315°C 50 @ 66°C
14 @ 204°C
550°C NONE 34 @ 150°C
6.5 @ 300°C
2.4 @ 500°C
e - high evaporation fl - flash point

Power

Power to the bath is provided by an AC mains supply. See Section 3.1, Specifi-
cations, for power details. Power to the bath passes through a filter to prevent
switching spikes from being transmitted to other equipment.
To turn on the bath switch the control panel power switch to the ON position.
The stir motor will turn on, the LED display will begin to show the bath tem-
Specific Specific Heat
Gravity (cal/g/°C)
1.71 @ 40°C 0.2
0.810 @ 0°C 0.6
0.792 @ 20°C
1.00 1.00
1.05 0.8 @ 0°C
0.87 @ 25°C 0.48 @ 25°C
0.84 @ 75°C 0.53 @ 75°C
0.81 @ 125°C 0.57 @ 125°C
0.92 @ 25°C 0.4
0.934 @ 25°C 0.43 @ 40°C
0.45 @ 100°C
0.482 @
200°C
0.949 @ 25°C 0.370 @ 40°C
0.393 @
100°C
0.420 @
200°C
0.96 @ 25°C 0.4
1.07 @ 25°C 0.358 @ 40°C
0.386 @
100°C
0.433 @
200°C
1.11 @ 25°C 0.363 @ 40°C
0.454 @
100°C
0.505 @
200°C
0.96 @ 25°C 0.34 @
100°C
2.0 @ 150°C 0.33
1.9 @ 300°C
1.7 @ 500°C
fr - freeze point v - viscosity — Flash point test oc = open cup
General Operation
Thermal Thermal
Conductivity Expansion
(cal/s/cm/°C) (cm/cm/°C)
0.0004 0.0011
0.0005 @ 0.0014 @
20°C 25°C
0.0014 0.0002 @
25°C
0.001
0.00025 @ 0.0007 @
25°C 50°C
0.00028 @ 0.00105
25°C
0.00032 @ 0.00108
25°C
0.00034 @ 0.00107
25°C
0.00037 @ 0.00104
25°C
0.00035 @ 0.00075
25°C
0.00035 @ 0.00077
25°C
0.0003 0.00095
0.0014 0.00041
Resistivity
Ω-cm )
(10
1 2
5 @ 25°C
1000 @ 25°C
10 @ 150°C
1000 @ 25°C
50 @ 150°C
1000 @ 25°C
50 @ 150°C
1000 @ 25°C
50 @ 150°C
100 @ 25°C
1 @ 150°C
100 @ 25°C
1 @ 150°C
100 @ 25°C
1 @ 150°C
1.7 Ω /cm
3
cc
25