Step 4 Connect High-Current Audio Filter; (Delayed) - Belkin PF30 User Manual

Hookup and Installation
Step 4
Connect High-Current Audio Filter (8 second delay)
This outlet is specifically designed to filter out AC line noise while
delivering maximum current to power-hungry amplifiers and other high-
current audio components. The High-Current outlet is also equipped with
an 8 second delay. This allows your high-current amplifier to turn on last
and turn off first, avoiding that annoying "thump" from getting to your
speakers and potentially damaging them. The High-Current outlet is
"Switched" and is controlled by the "Switched" button on the front of the
Power Console.
A. Attach PureAV power cord labels to each component's power cord
before you plug the cord into the corresponding outlet on the Power
Console.
B. AMP - Connect your main amplifier power cord to the outlet labeled
"AMP-delay".
Note: You can connect any type of high-current audio component into
the High-Current outlet. You are not limited to the components
listed above.
9