Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return previous step, press the red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the clock
6
Enjoy your TV.
If You Want to Reset This Feature...
O
m → Setup → Plug & Play → ENTERE
MENU
6
English
Connecting to an Antenna
Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
Select the
Home Use mode. Store Demo Mode is for retail
y
environments.
Return the unit's settings from
y
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, STD, HRC or IRC.
Press the ENTERE button to select Start. The channel search will start automatically.
For more information, refer to Channel → Auto Program. (p.11)
✎
Press the
ENTERE button at any time to interrupt the memorization process.
Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm.
Set these by pressing the ▲ or ▼ button.
Press the ENTERE button.
or
R-AUDIO-L
Store Demo to Home Use
MENU
for 5 sec.
VHF/UHF Antenna
Cable
ANT OUT
P
P
Y
R
B
POWER
P
P.SIZE
DUAL
SUBT.