Audio Filter 1 And Audio Filter; (Bank 04 And Bank 05) - Belkin AP41300f User Manual

Hookup and Installation
Step 5
Connect Audio Components to Audio Filter 1 and Audio Filter 2

(Bank 04 and Bank 05)

The Belkin PureAV Power Console PF60 contains two isolated audio filters
that are optimized to clean and condition the power to all of your audio
components. The audio filters also isolate your audio components from
connected digital, video, and high-current audio components.
A. Attach Belkin PureAV power cord labels to each component's power
cord before you plug the cord into the corresponding outlet on the
Power Console.
B. CD – Connect your CD player power cord to the outlet labeled "CD".
C. Tape – Connect your tape player power cord to the outlet labeled
"Tape".
D. Auxiliary – This outlet can be used to connect any other audio
equipment you may have.
E. Receiver (Preamp) – Connect your receiver or preamp power cord to
the outlet labeled "Receiver".
Note: You can connect any type of audio component into any of the audio
filter outlets. You are not limited to the components listed above.
12