Cm195Ac/Cm195Ad "Datakit" Vcs Interface Card Interconnections - AT&T 3B2/300 Technical Reference Manual

- - - - - - - - - - - - - - - - - Appendix: CONNECTOR AND CABLING INFORMATION
CM195AC/CM195AD "DATAKIT" VCS INTERFACE CARD
INTERCONNECTIONS
The CM195AC/CM195AD Datakit Virtual Circuit Switch (VCS) Interface Card consists of two
circuit cards. The interconnections for the two cards include the following:
• Two 86-pin card edge connections
• Two 40-conductor ribbon cables
• Fiber optic receiver
• Fiber optic transceiver.
Figure B-22 shows the layout of the Datakit VCS Interface Card. Refer to this figure for card
connector location information. Pin and signal information is provided in tables following the figure for
each of the card connectors. The figure is printed front and back with a blank unit so that the figure
can be used in conjunction with any table.
CONNECTOR AND CABLING INFORMATION B-125