Uniden POLARIS Owner's Manual page 34

UT888ZL (POLARIS)-0805
To set USER MMSI code
1. Press and hold MENU for 2 seconds.
2. Rotate the PUSH – SELECT knob to
select
3. Press the PUSH – SELECT knob at
SETUP
4. Rotate the PUSH – SELECT knob to
select
PUSH – SELECT knob, the following
screen appears.
5. You can now enter the USER MMSI
code. Rotate the PUSH – SELECT
knob clockwise to increase the
number, counterclockwise to
decrease. The number will be
entered when the PUSH – SELECT
knob is pressed, and the blinking digit
moves to the right.
6. After the final digit is entered, the
confirmation screen appears, and you
can make your selection by rotating
the PUSH – SELECT knob. Press
the PUSH – SELECT knob and the
POLARIS returns to the following
screen.
Note: You can program your POLARIS
twice. After that send your
POLARIS to Uniden for
programming.
8/5/02 4:50 PM
SETUP .
, the SETUP menu appears.
, and press the
USER MMSI
Page 31
HI
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
FIPS
USER MMSI
GROUP MMSI
U.I.C.
DIRECTORY
AUTO.CH.SW
USER MMSI
000000000
USER MMSI
685749638
USER MMSI
685749638
YES
NO
FIPS
USER MMSI
GROUP MMSI
U.I.C.
DIRECTORY
AUTO.CH.SW
31
CAN