Accessories Mounts - Siemens CRT Brochure

Siemens cctv brochure
Table of Contents

Advertisement

Explosion-Proof Housings and Mounts

Accessories Mounts

Type
FH07W
FH07W/L
FH07W/U
Phoenix-CERT..
Phoenix-CERT-Siemens
Phoenix-CERT-3rd Party
Phoenix-FIT..
Phoenix-FIT-Siemens
6-10
FH07W Wiper Kit for FH07 Housing - 230 V AC Motor
Wiper components for the FH07 Phoenix explosion-proof camera hous-
ings. These are factory-fit parts that can be used on the ATEX IIB and IIC
housings.
Power consumption
Power requirements
Weight
FH07W/L Wiper Kit for FH07 Housing - 24 V AC Motor
Wiper components for the FH07 Phoenix explosion-proof camera hous-
ings. These are factory-fit parts that can be used on the ATEX IIB and IIC
housings.
Power consumption
Power requirements
Weight
FH07W/U Wiper Kit for FH07 Housing - 110 V AC Motor
Wiper components for the FH07 Phoenix explosion-proof camera hous-
ings. These are factory-fit parts that can be used on the ATEX IIB and IIC
housings.
Power consumption
Power requirements
Weight
Factory Fit Camera & Lens including ATEX Equipment Certification
Siemens cannot supply ATEX IIB or IIC Equipment certificates unless the
Phoenix-CERT-option is ordered with each housing and PTZ.
Factory Fit Siemens Camera & Lens including ATEX Equipment
Certification
This option should be ordered if Siemens products will be used in the
Phoenix housings. This option shall be ordered for each housing.
Factory Fit 3rd Party Camera & Lens including ATEX Equipment
Certification
This option should be ordered if 3rd party products will be used in the
Phoenix housings. This option shall be ordered for each housing.
Fitting Fee‚ issued for each additional Component to be installed
The Phoenix-FIT-option must be ordered for each additional part which
should be installed in the housing: i.e. power supply‚ 2 wire transmitter
(this is not considered for FH07 Wiper and FH07-RX telemetry receiver).
Fitting Fee‚ issued for each additional Siemens Component to be
installed
This option should be ordered if Siemens products will be used in the
Phoenix housings. This option shall be ordered for each component.
4.6 VA
230 V AC 50/60 Hz
1.50 kg
4.8 VA
24 V AC‚ 50/60 Hz
1.50 kg
4.4 VA
110 V AC‚ 50/60 Hz
1.50 kg
Order No.
S24245-S4150-A1
S24245-S4150-A3
S24245-S4150-A2
Phoenix-CERT..
S24245-C4090-A3
S24245-C4090-A4
Phoenix-FIT..
S24245-C4090-A5
© Siemens Building Technologies Group

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tft

Table of Contents