Operating Displays And Connections; Front Panel - Gigaset 108 Owner's Manual

First Steps

Operating displays and connections

Front panel

LED displays
The front panel of the Gigaset WLAN Repeater 108 contains LED displays that show the
operating state and simplify installation and fault finding in the network.
The LED's show the following:
LED State
On
WLAN Flashing
Off
On
LAN Flashing
Off
On
Power
Off
10
Status
There is a wireless connection to the local network.
u
The Gigaset WLAN Repeater 108 is sending or receiving
data on its WLAN interface.
u
New firmware is being loaded on the Gigaset WLAN
Repeater 108 or the Gigaset WLAN Repeater 108 is
rebooting.
The WLAN interface is not active.
There is a connection to the local network via the Ethernet
cable.
The Gigaset WLAN Repeater 108 is sending or receiving data
via the Ethernet cable.
There is no connection to the local network via the Ethernet
cable.
The Gigaset WLAN Repeater 108 has been powered up.
The Gigaset WLAN Repeater 108 has been powered down.