Accu-Chek Performa Owner's Booklet page 66

Automatic power off
Power supply
Display
Dimensions
Weight
Construction
Protection class
Meter type
Control solution storage conditions
Electromagnetic Compatibility
This meter meets the electromagnetic immunity requirements as per EN ISO 15197 Annex A. The chosen
basis for electrostatic discharge immunity testing was basic standard IEC 61000-4-2. In addition, the meter
meets the electromagnetic emissions requirements as per EN 61326. The meter's electromagnetic emission
is thus low. Interference from the meter to other electrically-driven equipment is not anticipated.
64
50705_05853397002_EN.indb 64
2 minutes
One 3-volt lithium battery (coin cell type CR2032)
LCD
93 Î 52 Î 22 mm (LWH)
Approx. 62 g (with battery)
Hand-held
III
The Accu-Chek Performa meter is suitable for continuous
operation.
Refer to the control solution package insert.
4/24/12 8:32 AM