Restarting A Job - Siemens ProLINE-RoadRunner ProLINE-RoadRunner Operator's Manual

44

Restarting a Job

1
Job
Advance Pocket
3
> Align Pocket
Purge
ProLINE-RoadRunner Operator's Guide
To restart RoadRunner after a pause
or an emergency stop:
1. Turn the Emergency Stop
button clockwise to release it, if
needed.
2. Press Menu until the main level
4
menu is displayed
3. Select Align Pocket.
4. Press the Up Arrow to advance
the device tape until the next
5
pocket center hole lines up with
the alignment mark.
5. Press Start.
The job will resume.
A