Step Function; Angle Function; Zoom (Screen Enlarge) Function; Ez View Function - Siemens HT-Q100 Instruction Manual

Step Function

Press STEP button.
•
The picture moves forward one frame each time the button is pressed
during playback.
•
Note No sound is heard during slow playback and step motion
playback.

Angle Function

This function allows you to view the same scene in different angles.
Press Cursor
1 2
Press INFO button. ton to move to
ANGLE (
1/3
3
Press Cursor , or numeric buttons to
select the desired angle.
•
Each time the button is pressed, the angle changes as follows:
1/3
2/3
3/3
•
Note The Angle function works only with discs on which multiple
angles have been recorded.
35
DVD
DVD
but-
) display.
1/3

Zoom (Screen Enlarge) Function

This function allows you to enlarge a particular area of the displayed image.
Press Cursor
1 2
Press ZOOM but-
,
ton. move to the area
you want to enlarge.
SELECT ZOOM POSITION
•
Note When a DivX disc is being played, only the 2:1 zoom-in is available.

EZ VIEW Function

Press EZ VIEW button.
•
Each time the button is pressed, the zoom function will switch between On
and Off.
•
When a movie is played in Widescreen format, black bars at the top and bot-
tom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW EZ VIEW OFF
Note
•
This function will not work if the DVD is recorded with multi-camera angle format.
•
Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
•
This feature is not supported for DivX discs.
DVD
, ,
3
Press ENTER but-
buttons to
ton.
•
Each time the button is pressed, the
zoom level changes as follows:
DVD
36
ENG