Setting Up The Monitor; Connect The Monitor To Your Computer; Connect The Monitor To The Video Source - Siemens CMTC1720 User Manual

5

Setting up the Monitor

5.1

Connect the Monitor to your Computer

5.2

Connect the Monitor to the Video Source

Siemens Building Technologies
Fire Safety & Security Products
Read this chapter for important safety information and how to set up and connect
the display to your computer or camera.
Check the attachment of monitor. There is power cord, power adapter user's
1.
manual and PC signal cable.
Make sure the surface for placing the monitor is stable and level.
2.
Keep the monitor away from sources of liquids and moisture.
3.
Keep the monitor's vents free from obstruction.
4.
If you will not be using the monitor and computer for a day or more, turn off
5.
both devices.
Make sure the computer is turned off.
1.
Plug in the monitor.
2.
Connect the PC signal cable from the computer to the monitor.
3.
Turn on the computer.
4.
Push the power button in front of the monitor.
5.
Push the Source button to display PC input signal.
6.
Plug in the monitor.
1.
Connect the video signal to the monitor.
2.
Push the power button in front of the monitor.
3.
Push the Source button to display video input signal.
4.
Setting up the Monitor
9
10.2006