Figure 2: Com Port Transmission Settings; Figure 3: Displaying The Transmitted Nmea Protocols - Siemens XT55 User Manual

XT55 GPS Startup User's Guide
Confidential/Released
The appearing dialog box shows the default settings for the selected COM port.
NOTE: The pre-defined factory settings of the XT55 GPS port SDn1 (4800bps, 8 data bits,
no parity, 1 stop bit, no flow control) cannot be changed, otherwise no connection to the
XT55 GPS port will be established.
If a connection to the XT55 module has been established, the transmitted protocols will be
displayed.
XT55_GPS_startup_ug_V02a

Figure 2: COM port transmission settings

Figure 3: Displaying the transmitted NMEA protocols

Page 8 of 13
s
m
o b i l e
28.06.2004