Any Key Answer; Minute Beep - Siemens S75 User Manual

Status check
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is trans-
mitted by the network and
displayed.
Clear all
All set diverts are cleared.
Additional information
Note that the divert is stored in the network
and not in the phone (e.g. when the SIM
card is changed).
Reactivating divert
The last divert has been stored. Proceed as
with "Set divert". The stored phone number
is displayed. Confirm number.
Call screening
Only calls from phone numbers that
are in Contacts or on the SIM card or
assigned to a group are signalled au-
dibly. Other calls are only displayed.

Any key answer

b
Incoming calls can be accepted by
pressing any key (except for

Minute beep

During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
Setup 79
b
).
B