Questions & Answers - Siemens C75 User Manual

Siemens mobile user guide
Hide thumbs Also See for C75:
Table of Contents

Advertisement

Questions & Answers
If you have any questions about using your phone, visit us at
www.siemens.com/mobilephonescustomercare anytime. For additional help, we have
listed below some frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network pro-
vider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at www.siemens.com/
mobilephonescustomercare. Siemens will then send you the configuration messages.
Please follow the instructions contained in those messages.
Problem
Phone cannot be
switched on.
Too little standby
time.
Charging error
(charge icon not
displayed).
Possible causes
On/Off key not pressed long
enough.
Flat battery.
Battery contacts dirty.
See also below under
"Charging error"
Frequent use of organiser and
games.
Fast search activated.
Display illumination on.
Unintentional keystrokes
(illumination!).
Battery totally discharged.
Temperature out of range:
+5 °C to +45 °C.
Contact problem.
No mains voltage.
Wrong charger.
Battery faulty.
Questions & Answers
Possible solution
Press On/Off key for at least two seconds.
Charge battery. Check charging indicator in the
display.
Clean contacts.
Restrict use if necessary.
Deactivate speed search(page 94).
Switch off display illumination (page 79).
Activate key lock (page 91).
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Make sure the ambient temperature is right, wait for
a while, then recharge.
Check power supply and connection to the phone.
Check battery contacts and telephone connection
socket, clean them if necessary, then insert battery
again.
Use different mains power socket, check mains
voltage.
Only use original Siemens accessories.
Replace battery.
119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents