ACR Electronics PLB-350C Product Support Manual page 26

406 RF
The fourth test checks for 406 MHz signal strength/RF power. If power is
adequate the system passes.
406 RF
The fourth test checks for 406 MHz signal strength/RF power. If power is not
adequate the system fails.
GPS
The fifth test checks GPS engine readiness. If the GPS is ready the beacon
passes.
GPS
The fifth test checks GPS engine readiness. If the GPS is not ready the
beacon fails.
SELF
If all six tests pass, the system advises you that Self-Test passed.
SELF
If one of the six tests fails, the system advises you that Self-Test has failed.
SEE
This message appears if Self-Test failed. The system advises you to refer to
this Product Support Manual (User Book) for information on what to do and
who to contact.
SEEK
This message appears if Self-Test failed. The system advises you to seek
service from an authorized Service Center. Not only should the beacon be
fixed immediately, it also should not be placed into service until the problem is
addressed.
NOTE: "SEEK FIX NOW" has the same meaning as "FIX NOW"
Y1-03-0244B
TEST √
TEST 
TEST √
TEST 
TEST
TEST
USER
FIX
G
R
G
R
PASS
G
FAIL
R
BOOK
NOW
26