During A Call; Headset - Siemens A50 User Manual

During a call

§Menu§ Setup
then select a function:
Call waiting
If you are registered for this service
you can check whether it is set, and
you can activate or deactivate it
(p. 14).
Hide ID
When you make a call, your number
may be displayed on the recipient's
display (depending on the service
providers).
To suppress this display, you may
activate the "Conceal ID" mode for
the next call or for all subsequent
calls. You may need to register sepa-
rately with your service provider for
these functions.
Setup
During a call
~
~

Headset

§Menu§ Setup
If an original Siemens Headset
(p. 69) is used the profile is activated
automatically as soon as the headset
is plugged in.
User-definable settings
Auto answer
(factory default: off)
Calls are automatically accepted af-
ter a few seconds (except where the
ringing tone is switched off or set to
beep). You should therefore be wear-
ing the headset.
Unwanted listening-in is possible!
Automatic setting
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
Automatic answer
If you fail to notice an incoming call there is
a risk that it may be overheard by others.
61