Receiver Antenna Installation; Rear Mounted Antenna Installation; Front Mounted Antenna Installation - Shure UC User Manual

ENGLISH

RECEIVER ANTENNA INSTALLATION

Rear Mounted Antenna Installation

Attach the supplied UHF antennas to the BNC connectors on the receiver back panel, as shown in Figure 23. For
best performance, point the antenna tips away from each other at a 90 angle (45 from vertical axis).
NOTE: For improved RF performance (3 dB additional gain), optional UA820A 1/2 wave antennas may be used.

Front Mounted Antenna Installation

NOTE: The UA600 Front Mount Antenna kit is sold separately.
1. Insert the two bulkhead adapters through the larger holes on each side of the front panel, and secure them from
each side, using the supplied attaching hardware. See Figure 24.
2. Connect antenna cables to the receiver and the bulkhead adapters, as shown in Figure 25.
NOTE: Two cable clamps are included
with the supplied hardware kit. The
clamps allows the antenna cables to be
secured to the sides of the receiver.
NOTE: Shure recommends connecting the bulkhead adapter and antenna cables before mounting the receiver in a
rack. Once the receiver is in the rack, it is more difficult to install the bulkhead adapters and antenna cables.
REAR MOUNTED ANTENNA INSTALLATION
FIGURE 23
UC4 RECEIVER
(TOP VIEW)
BULKHEAD
ADAPTER
FRONT MOUNTED ANTENNA INSTALLATION
FIGURE 24
ANTENNA
CABLE
UC4 RECEIVER
(TOP VIEW)
FRONT MOUNTED ANTENNA CABLE CONNECTIONS
FIGURE 25
– 15 –
BULKHEAD
ADAPTER
ANTENNA
CABLE
ENGLISH