iLive ISBW2116B Manual page 7

BLUETOOTH PAIRING AND CONNECTION
DISCONNECTION / RE-CONNECTION
*
Press and hold the
unit and the external bluetooth enabled device.
If using same external bluetooth enabled device to pair with the main unit again,
select the "ISBW2116" of main unit again to connect with main unit again, then
wait deputy unit automatically connect with the main unit.
*
Press and hold the
and hold the
*
Press and hold the
few seconds, the deputy unit will reconnect with main unit again.
SWITCHING MAIN UNIT
Press and hold the
deputy unit, wait until they reconnect again, the deputy unit will become the main
unit.
NOTE:
The two units will enter standby mode without any audio output or operation after
about 30 minutes.
Please restart two units and make connection again for operation.
INCOMING CALLING DURING PLAYING IN BT MODE
An incoming call received during playback in bluetooth mode, works as follows:
Touch " " button on the main unit to answer the incoming call.
Touch " " button on the main unit again to end the call after conversation.
Holding the "
Double press "
NOTE:
Secondary unit will not function when in calling mode.
or button on main unit to disconnect with both deputy
button on deputy unit to disconnect with main unit, press
button on deputy unit to reconnect with main unit.
button on deputy unit to disconnect with main unit, wait a
button on main unit, then press and hold the
"button on the main unit to refuse the call.
" button on the main unit to redial the last called number.
7
button on