Advertisement
Quick Links
MDCBiuOS2
Mounting Instructions
WHAT'S IN THE BOX
IMPORTANT NOTES
•
Visit MDC BluOS 2 page at
nadelectronics.com
for a list of compatible NAD products that can integrate MDC BluOS 2 module. Download also from the same
web page "Configuring MDC BluOS 2"for
instructions
on how to setup your MDC BluOS 2.
•
The
reference
model
used in
this mounting instruction is C 368.
INSTALL MDC BluOS 2
STEP A
Remove the MDC Classic cover and
top
cover by loosening and taking out the
screws holding them
in
place.
For information on
installation
location, refer to the corresponding owner's
manual for the NAD product into which you are integrating the MDC BluOS 2.
STEPB
Take note of the unique Wi-Fi MAC address (the same can be found on
the MDC BluOS 2 metal back plate). This is needed when configuring the
MDC BluOS 2.
2
Remove the protective tape from the contact
terminals.
3
Slide MDC BluOS 2 module through the
rail
pushing all the way to the
corresponding connectors.
4
Make sure MDC BluOS 2 module is locked in.
Use corresponding screws to fix back into place MDC BluOS 2 module and top
cover.
Advertisement
