Philips Semiconductors
When running the DOS batch file, carefully check messages (see Figure 5-1) to ensure that all
components are successfully loaded.
5.3.
Using the Application Software
This application software handles board initialization and MPEG2 stream transfer. Before running
this application, make sure that all the cables are connected and A/V sources are present. For
details on connection, see Section 8.
The initialization process is explained in the following sections.
5.3.1. Board Initialization
You can start the application software either by double-clicking the MPEG.exe
the C:\PhilipsMPEG directory, or by double-clicking the MPEG.exe icon on your desktop if you
have already created a shortcut.
To initialize the board, select a proper TV standard under the Capture menu. For example:
Initialize PAL (see Figure 5-2) or Initialize NTSC (see Figure 5-3). S-Video is a default video
input source.
In this document, items that you click or type are indicated in bold
1
User manual
ISP1581 Hi-Speed USB MPEG2 Encoder Reference Kit
Figure 5-1: Contents of the register.bat Batch File
Rev. 03.00 — 12 April 2004
.
UM10016_3
1
icon present in
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
9 of 28