Page 1
Technical Instruction Manual Issue 3.0 ...... 26 August 2009 Nautel Limited 10089 Peggy's Cove Road, Hackett's Cove, NS, Canada B3Z 3J4 T. 877 6 nautel (628835) or +1.902.823.2233 F.+1.902.823.3183 info@nautel.com U.S. customers please contact: Nautel Inc. 201 Target Industrial Circle, Bangor ME 04401 T.
Page 3
Nautel for repair. The repairs will be made without charge to the Customer. Where warranty replacements or repair are provided under items 2 or 3, Nautel will pay that part of the shipping costs incurred in returning the part/assembly to the Customer.
Page 4
MODULE EXCHANGE SERVICE In order to provide Nautel customers with a fast and efficient service in the event of a problem, Nautel operates a factory rebuilt, module exchange service which takes full advantage of the high degree of module redundancy in Nautel equipment.
Page 5
CAUTION shall immediately precede the text to which it applies. NOTE A NOTE denotes important information pertaining to an operating procedure, condition, statement, etc., which is essential to highlight. A NOTE may precede or follow the text to which it applies. CL-HD Antenna Technical Instruction Manual Aug.26.09...
Page 6
These devices are specifically identified in the equipment parts list(s) by including ‘BeO’ in the part’s description. DO NOT cut, crush or grind devices because the resulting dust may be HAZARDOUS IF INHALED. Unserviceable devices should be disposed of as harmful waste. CL-HD Antenna Technical Instruction Manual Aug.26.09...
Description 3.1.4 Quantity List of Tables Recommended Site Test Equipment CL-HD Helideck Antenna – Mechanical Parts List List of Figures 2-1a Typical Helideck Antenna Installation (ATU at end of field) 2-1b Typical Helideck Antenna Installation (ATU at center of field...
Page 9
Release Control Record Issue Date Reason 26 August 2009 Release 3 of equipment CL-HD Antenna Technical Instruction Manual Aug.26.09...
(helidecks) on production platforms. offshore platforms. 1.5 MECHANICAL DESCRIPTION 1.2 FACTORY SUPPORT The CL-HD antenna is composed of 3/16” Nautel provides after sales factory diameter stainless-steel wire rope [up to a support. Technical assistance is available maximum of 300 ft (92 m) long] suspended on a 24 hour, seven days a week basis.
• Ensure antenna will not interfere with any machine operations (e.g., crane). Figures 2-1a and 2-1b illustrate two different layouts of the CL-HD antenna. • Location of transmitter and ATU Figure 2-1a shows an end feed antenna. mounting.
Perform either step (i) or (j), depending on using the M10 x 40 mm long bolts (4 the type of safety net support. CL-HD Antenna Technical Instruction Manual Page 2-2 Issue 3.0 Section 1 General information...
Page 15
If the safety netting structure is mobile, (2) wire rope clips (item 14). Pull the you should also bond the safety netting antenna wire tight. structure to the helideck structure. CL-HD Antenna Technical Instruction Manual Page 2-3 Section 2 Preparation for Use and Installation Issue 3.0...
Page 16
Figure 2-1a Typical Helideck Antenna Installation (ATU at end of field) CL-HD Antenna Technical Instruction Manual Page 2-4 Issue 3.0 Section 2 Preparation for Use and Installation...
Page 17
Figure 2-1b Typical Helideck Antenna Installation (ATU at centre of field) CL-HD Antenna Technical Instruction Manual Page 2-5 Section 2 Preparation for Use and Installation Issue 3.0...
Figure 2-2 Helideck Antenna Support and Bracket Mounting Method CL-HD Antenna Technical Instruction Manual Page 2-6 Issue 3.0 Section 2 Preparation for Use and Installation...
Helideck Antenna End Kit both text and various installation figures. (Nautel Part # 199-9230), whose quantity is The components are also identified with fixed. this number in the packing crates.
Table 3-1: CL-HD Helideck Antenna - Mechanical Parts List QUANTITY ITEM # NAUTEL # DESCRIPTION end kit (for both per middle kit start & end) (see note ***) Not Used Not Used 199-9210-01 Helideck Antenna Support Bracket 199-9212 Helideck Vertical Antenna Support Pipe...