Fujitsu PSWITCH 2048T User Manual page 10

FUJITSU PSWITCH
FUJITSU PSWITCH 4032P
LED status
LED
Off
System LED
Solid Green
Blinking Green
Solid Yellow
Blinking Yellow Minor faults, the faults are not traffic affecting
Off
Power LED
Solid Green
Solid Yellow
Blinking Yellow One of Power Supplier is failed
Solid Green
Fan LED
Solid yellow
Off
Located LED
Blinking Blue
Off
40G QSFP slot
LEDs
Solid Green
Blinking Green
Off
Management
Port LEDs
Solid Yellow
Solid Green
Blinking Green
Table 1-2: Front LED status (FUJITSU PSWITCH 4032P)
I FAN LED on the front panel will be yellow when one of the FAN LEDs at the
rear side fails.
10
Condition
Power is off
Normal operation
Booting in progress
Major faults, the faults are traffic affecting
Power is disconnected
Operating normally (Dual or Single Supply)
POST in progress
FAN operating normally
FAN is failed including incompatible airflow direction
No power or the locator function is disabled.
The locator function is enabled
No link (Link LED)
A valid 10G/40Gbps link (Link LED)
10G/40G speed, Packet transmission or reception in
progress (ACT LED)
No link is established on the port
A valid link at 10/100Mbps is established on the port
(Link LED)
A valid link at 1000Mbps is established on the port
(Link LED)
Activity, transmitting or receiving packet at this port
(ACT LED)
User's Guide
December/2018