Replacing The Lamp - Samsung SHP-700 Owner's Instructions Manual

Replacing the Lamp

● Be careful not to touch the inside of the projector or the lamp gauge.
● Make sure to work only with your hands (do not insert foreign objects into the
projector).
● Make sure to turn off the main power and disconnect the power cord before
replacing the lamp.
1. Turn off the projector.
Press the Power button and wait until the cooling fan has stopped.
2. Disconnect the power cord.
3. Remove the lamp gauge cover.
Unfasten the lamp gauge cover screws on the back of projector, and take the
cover off.
4. Disconnect the power cord.
Unfasten the screws securing the lamp gauge and pull the lamp gauge out to the
front.
5. Insert a new lamp gauge.
Make sure to push the lamp gauge in until it is in place, and then re-fasten the
screws.
6. Close the lamp gauge cover
Close the projector cover and re-fasten the screws
7. Connect the power cord.
8. Turn on the projector and initialize the lamp time.
36