Advertisement
To use the wireless network, inserting of the KX-HGC200 to the KX-HGW200
and to the computer(s) is needed. The KX-HGC200 can be inserted to the
PCMCIA Type II card slot of a computer.
1
Insert the KX-HGC200 to the KX-HGW200.
a:Make sure the power of the KX-HGW200 is off by checking the POWER
indicator of the KX-HGW200.
b:Open the cover on the front side of the KX-HGW200.
c: Insert the KX-HGC200 to the card slot of the KX-HGW200 with the arrow
mark on the KX-HGC200 pointing to the slot.
Note:
≥Be sure to insert the KX-HGC200 fully.
≥Insert on the proper direction. When you feel resistance while
inserting, turn the KX-HGC200 over and reinsert it.
d:Close the cover of the KX-HGW200.
To remove the KX-HGC200 from the KX-HGW200,
press the lever on the KX-HGW200 along with the card slot.
Hardware Installation
KX-HGC200
Arrow mark
Card slot
– 4 –
0
G W 20
K X -H
KX-HGW200
Advertisement
