GE PACSystems ICRXIDIXNE19LCTA User Manual page 2

These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible
contingency to be met during installation, operation, and maintenance. The information is supplied for informational
purposes only, and GE makes no warranty as to the accuracy of the information included herein. Changes, modifications,
and/or improvements to equipment and specifications are made periodically and these changes may or may not be reflected
herein. It is understood that GE may make changes, modifications, or improvements to the equipment referenced herein or to
the document itself at any time. This document is intended for trained personnel familiar with the GE products referenced
herein.
This document is approved for public disclosure.
GE may have patents or pending patent applications covering subject matter in this document. The furnishing of this
document does not provide any license whatsoever to any of these patents.
GE provides the following document and the information included therein as is and without warranty of any kind, expressed
or implied, including but not limited to any implied statutory warranty of merchantability or fitness for particular purpose.
For further assistance or technical information, contact the nearest GE Sales or Service Office, or an authorized GE Sales
Representative.
Revised: Jan 2016
Issued: Apr 2014
Copyright © 2014 - 2016 General Electric Company, All rights reserved.
___________________________________
* Indicates a trademark of General Electric Company and/or its subsidiaries.
All other trademarks are the property of their respective owners.
Refer to the section, Contact Information
Please send documentation comments or suggestions to
Location
General Specifications
Display Specifications
Environmental Specifications
Dimensions and Clearances
For public disclosure
for support on this product.
controls.doc@ge.com
Document Updates
Description
Updates to the RXi Display general specifications table
Added Minimum Clearances around RTM specification to the table
Updates to the RXi Display environmental specifications table
Removed this section and placed clearances information (Minimum Clearances
around RTM) in the Display Specifications table