Timer Operation; Storing Stations In Memory; Selecting A Preset Station - Sharper Image CD Stereo Instructions Manual

Storing Stations in Memory

Stereo can store up to 20 FM and 20 AM stations.
1. Select desired radio station.
2. Press MEMORY. "MEMORY" indicator flashes on LCD.
3. Press PRESET to assign preset number. For example, to store a radio station on preset #9, press
PRESET nine times until LCD displays #9 as preset number.
4. Press MEMORY to store selection. "MEMORY" indicator will stop flashing.
5. Repeat steps 1-4 to store additional radio stations in memory.

Selecting a Preset Station

In tuner mode, press PRESET to recall radio stations in memory.

Timer Operation

Timer automatically turns stereo on and off during times you choose.
1. Choose radio station or disc and track number. If no track is selected, the first track of the selected
disc will play.
2. Press and hold TIMER for about 5 seconds until "TIMER ON" indicator flashes on LCD. Hour
segment will flash.
3. Press CD-TUNER-SKIP buttons to select wake-up hour.
4. Press TIMER again. Hour number stops flashing and minute number begins flashing.
5. Press CD-TUNER-SKIP buttons to select wake-up minute.
6. Press TIMER again. "TIMER OFF" indicator appears and flashes. Hour segment flashes.
7. Press CD-TUNER-SKIP buttons to select time-off hour.
8. Press TIMER again. Hour number stops flashing and minute number begins flashing.
9. Press CD-TUNER-SKIP buttons to select time-off minute.
10. Press TIMER again to end setting process. LCD shows on and off times for timer. At this point,
timer has been activated. "TIMER" indicator appears on LCD.
SA248