JVC TH-D337H User Manual page 17

Hide thumbs Also See for TH-D337H:
Table of Contents

Advertisement

Maintenance
Ensure the unit is fully unplugged from the mains socket before cleaning.
To clean the units, wipe the case with a slightly moist, lint-free cloth.
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
Do not spray aerosol at or near the unit.
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains various tips. If you require additional assistance please click on the link for Support
Centre:
Norway: www.elkjop.no/service
Denmark: www.elgiganten.dk/service
Problem
No power.
The remote control does
not function.
Loud hum or noise is
heard.
No sound from
the soundbar and
subwoofer.
The unit does not
respond when pressing
any buttons.
TH-D337H_IB_170505_will.indd 19
Sweden: www.elgiganten.se/service
Finland: www.gigantti.fi/huolto
Solution
Ensure the mains plug is connected.
Make sure that you select the On mode.
Use the remote control near the unit.
Point the remote control at the remote sensor on the unit.
Replace the battery in the remote control with a new one.
Remove any obstacles between the remote control and
the unit.
The plugs and sockets are dirty. Wipe them with a cloth
slightly moistened with alcohol.
Please try either one of the solutions below:
Make sure that the unit is not muted. Press MUTE or
VOL +/– button to resume normal listening.
Press
on the unit or on the remote control to switch the
soundbar to standby mode. Then press the
to switch the soundbar on.
Unplug the soundbar from the mains socket, then plug it
in again. Switch on the soundbar.
Ensure the audio setting of the input source (e.g. TV, game
console, DVD player, etc.) is set to PCM mode while using
digital (e.g. HDMI, OPTICAL) connection.
The unit may not be able to decode all digital audio
formats from the input source. In this case, the unit will
mute. This is NOT a defect.
The unit may freeze up during use. Switch the unit off and
then on again at the mains socket to reset the unit.
GB
button again
19
5/5/2017 4:19 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents