Setting The Picture Mode; Setting The Jpeg Interval; Night Mode; Digital Out - Sharp LC-26DV22U Operation Manual

Function setup

Setting the picture mode

There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames
per second). Make this selection according to the type
of content being viewed.
Press SETUP and the SETUP screen
1
displays.
Press / to select
2
press / or ENTER.
3 Press / to select "Picture Mode", then
press or ENTER.
Press / to select your desired picture
4
mode, then press ENTER.
Selected item Description
Auto Select this position normally. The DVD
player automatically detects source
content, film or video, of playback source.
Film Suitable for playback of film content
pictures.
Video Suitable for playback of video content
pictures.
Press SETUP to return to the normal screen.
5

Setting the JPEG interval

You can continuously playback all JPEG files
automatically.
Press SETUP and the SETUP screen
1
displays.
Press / to select
2
press / or ENTER.
Press / to select "JPEG Interval", then
3
press or ENTER.
Press / to select your desired time, then
4
press ENTER.
Selected item Description
Off Plays back one file at a time.
5 Seconds Displays images in the form of a slide show.
Every 5 seconds the image changes.
10 Seconds Displays images in the form of a slide show.
Every 10 seconds the image changes.
15 Seconds Displays images in the form of a slide
show. Every 15 seconds the image
changes.
5 Press SETUP to return to the normal screen.
NOTE
• You cannot display DVD SETUP screen when disc is
playback.
48

Night Mode

Night Mode enables you to control the dynamic range
so as to achieve a suitable sound for your equipment.
(PICTURE), then
Selected item
Off
On
• This function works only during playback of Dolby Digital
• The level of Dynamic Range Reduction may differ

Digital Out

You can select the digital output sound format
(PICTURE), then
corresponding to your system connection.
Selected item
Off
PCM
Bitstream
• Even if you select "Bitstream", MPEG audio will be output
Press SETUP and the SETUP screen
1
displays.
Press / to select
2
/ or ENTER.
3 Press / to select "Night Mode", then
press or ENTER.
Press / to select "On" or "Off", then press
4
ENTER.
Night Mode
Digital Out
Description
It plays back at the recording level on
the disc.
Loud sound such as explosion or similar
is toned down slightly when played
back. This makes it suitable for when it
is connected to a stereo.
Press SETUP to return to the normal screen.
5
NOTE
recorded discs.
depending on DVD video disc.
Press SETUP and the SETUP screen
1
displays.
Press / to select
2
/ or ENTER.
3 Press / to select "Digital Out", then press
or ENTER.
Press / to select desired mode, then
4
press ENTER.
Description
There is no sound output from DIGITAL
AUDIO OUT jack.
Change Dolby Digital to PCM for the
output.
Select when connected to a 2 channel
digital stereo amplifier.
Disc audio bitstream data will be output.
NOTE
in PCM format.
(AUDIO), then press
: Off
:PCM
(AUDIO), then press