Symbols - Craftsman 151.74935 Operator's Manual

Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product better and safer.
SYMBOL
V Volts
A Amperes
Hz Hertz
W
Watt
hrs Hours
/min
Per Minute
n No Load Speed
o
Alternating Current
Direct Current
Lithium-Ion Battery
Recycling
Safety Alert
Read The Operator's
Manual
Eye and Hearing
Protection
Gloves
Safety Footwear
Kickback
Risk of Electrocution
Electric Shock
No Hands Symbol
Keep Bystanders Away

SYMBOLS

NAME
Voltage
Current
Frequency (cycles per second)
Power
Time
Revolutions, strokes, surface speed, orbits etc., per
minute
Rational speed, at no load
Type of current
Type or a characteristic of current
Designates that this tool is in compliance with
Lithium-Ion battery recycling program requirements
Indicates a potential personal injury hazard.
To reduce the risk of injury user must read and
understand operator's manual before using this
product.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with hearing
protection.
Wear non-slip, heavy-duty protective gloves when
handling this product.
Wear non-slip safety footwear when using this
product.
DANGER! Beware of kickback.
DANGER! Risk of electrocution!
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
Failure to keep your hands away from the blade will
result in serious personal injury.
Keep all bystanders at least 50' (15 m) away.
DESIGNATION/EXPLANATION
6 ― English