Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed:
Level
■
Drill with 1
/
" (3.0 cm), 3/16" (5.0 mm) and 6/19" (8.0 mm)
1
■
4
drill bits
Pencil
■
Tape measure or ruler
■
Adhesive tape
■
Flat-blade screwdriver
■
Metal snips
■
Phillips screwdriver
■
POZI driver
■
T20
Torx
bit or driver
®
®
■
Parts needed:
Part Name
Flexible duct as per
ceiling height;
external diameter
6" (15.2 cm)
Steel duct clamps for
6" (15.2 cm) ducts
Parts supplied:
Remove parts from packages. Check that all parts are included.
Part Name
Hood canopy
assembly with
ventilator and lights
installed
Chimney covers
Charcoal filter
mounting bracket
Charcoal filter
15-May-2018 14:29:52 EDT | RELEASED
INSTALLATION REQUIREMENTS
Qty.
1
"
6
(15.2 cm)
2
Qty.
1
2
1
1
In some European factories the letter "W" of the part code mentioned herein will be automatically
Part Name
Charcoal filter
clamps
Plastic transition
Paper template
3 prong plug with
connector
Wire clamp
Ø5 x 45 mm screws
Ø8 x 40 mm anchors
3.5 x 9.5 mm screws
2.9 x 6.5 mm pins
Flat washers
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Qty.
3
1
1
1
1
8
8
6
2
3
5