Monitor; Printer; Ul 294 Level Descriptions - Bosch AMC2 Series Installation Manual

AMC2 Modular
Controller
5.1.2

Monitor

–
–
5.1.3

Printer

Standard laser printer suited for graphics.
5.2

UL 294 Level Descriptions

The following UL 294 levels apply:
–
–
–
–
Bosch Access Systems GmbH
Graphical adapter with 1024x768 resolution and 32k colors
Resolution support:
– 1024 by 768
– 1280 by 1024
– 1920 by 1080
– 2560 by 1080
ACCESS CONTROL DESTRUCTIVE ATTACK LEVEL I - An
access control product intended for, but not limited to, a
controlled area that is not required to meet the destructive
Attack Test.
ACCESS CONTROL LINE SECURITY LEVEL I - An access
control product with no communication line security.
ACCESS CONTROL ENDURANCE LEVEL IV - An access
control product shall operate as intended at rated voltage
and current for 100,000 cycles of intended operation.
ACCESS CONTROL STANDBY POWER LEVEL II – An access
control product for units employing Model APS-PSU-60
Power Supply for 12 VDC and 24 VDC Mode. Level II
operates for 30 minutes.
UL Requirements | en
2018-09 | AMC2-4W_UL |
47