Advertisement
How to Configure Extended-Range VLANs
Command or Action
Step 4
shutdown
Example:
Switch(config-if)# shutdown
Step 5
exit
Example:
Switch(config-if)# exit
Step 6
vtp mode transparent
Example:
Switch(config)# vtp mode transparent
Step 7
vlan vlan-id
Example:
Switch(config-vlan)# vlan 2000
Step 8
exit
Example:
Switch(config-vlan)# exit
Step 9
interface interface-id
Example:
Switch(config)# interface
gigabitethernet1/0/3
Step 10
no shutdown
Example:
Switch(config)# no shutdown
Step 11
end
Example:
Switch(config)# end
Consolidated Platform Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3850 Switches)
24
Purpose
Shuts down the port to free the internal VLAN ID.
Returns to global configuration mode.
Sets the VTP mode to transparent for creating extended-range VLANs.
This step is not required for VTP version
Note
3.
Enters the new extended-range VLAN ID, and enter VLAN
configuration mode.
Exits from VLAN configuration mode, and return to global
configuration mode.
Specifies the interface ID for the routed port that you shut down in
Step 4, and enter interface configuration mode.
Re-enables the routed port. It will be assigned a new internal VLAN
ID.
Returns to privileged EXEC mode.
Configuring VLANs
OL-29322-01
Advertisement
