Salus miniSmartPlug User Manual

I B
N THE OX
miniSmartPlug Installation/User Guide
P I
RODUCT NTRODUCTION
The Salus miniSmartPlug switch is a ZigBee compatible,
connected AC switch that provides ON/OFF control of the
attached AC appliance and measures the power/energy
consumption of the appliance. Key features include:
• Quick and easy installation
• Support for OpenHome and ZigBee™ HA connected home
systems
• Support for loads up to 15Amps (resistive).
• Appliance load sensing to turn ON.
C I
ONTROLS AND NDICATORS
Socket
LED
Item Description
Plug NEMA 5-15 (Type B) plug. Compatible with US
and Canadian standard 120VAC/15A electrical
outlets
Socket NEMA 5-15 grounded (Type B) outlet.
Compatible with US/Canadian standard
120VAC/15A electrical plugs
Multi Multi-function user input button:
Button Pair, Rejoin, Factory Defaults, and On/Off
LED White LED status indicator
N :
OTE
Additional equipment may be
required due to building
construction or materials, or
other radio interference that
may reduce the radio range.
P I
AIRING NSTRUCTIONS
• Prepare to add devices per your system's instructions.
• Plug the miniSmartPlug switch into the desired AC outlet to
account for any radio interference
• When the switch is detected, follow your system's
instructions to finish adding the switch to the system. You
may need to press the Multi Button to identify the switch.
U
SING THE
Note: Immediately after being plugged in, there is a slight
delay before the miniSmartPlug switch starts measuring
energy and responding to the button or remote commands.
T O /O
URN FF N
• To toggle the miniSmartPlug switch (turn ON when OFF, or
Plug
turn OFF when ON), press the Multi Button.
R F
ESET TO ACTORY
• To reset the switch to factory default settings, press the
Multi Button while plugging in the switch and release the
button when the LED comes on.
F R
ORCE EJOIN TO
• To find a better path to the connected home system if the
Multi Button
network is intermittent and/or other ZigBee devices are
added/deleted, press the Multi Button 5 times quickly (less
than ½ sec between presses).
L
OAD SENSING OF APPLIANCE ON
• When the miniSmartPlug switch is OFF, the on/off switch of
certain appliances can be used to turn ON the
miniSmartPlug switch. Note: Turning OFF the miniSmartPlug
switch using the appliance switch is not supported.
• To turn ON the miniSmartPlug switch, start with the
appliance switch in the on position. Turn the appliance
switch off for about ½ sec, then back on. The miniSmartPlug
switch will turn ON when it detects the brief off period.
Note: Certain appliances, such as some CCFL lamps and
electronic equipment using wall transformers, cannot be
Installation/User Guide: miniSmartPlug (SX885ZB )
S I
AFETY NSTRUCTION
Read these instructions carefully before installing and using the miniSmartPlug and keep this guide
in a safe place for future reference.
•
Verify compatibility with your associated connected home system before installation.
•
Follow all instructions provided by your connected home manufacturer regarding the addition
of devices to your connected home system. An authorized, qualified installer may be required.
Salus accepts no responsibility for damage caused by not following these instructions.
S
WITCH
D
EFAULTS
C N
URRENT ETWORK
/
OFF SWITCH
monitored as their electrical characteristics do not change
enough when the appliance on/off switch is changed.
LED I
NDICATIONS
ON for 2 - 4 sec., then OFF Switch power up, Switch is OFF
3 flashes Searching for network to join
Steady ON Switch is ON
Steady OFF Switch is OFF
ON, flash OFF every 2 sec Switch is ON, no network
OFF, flash ON every 2 sec Switch is OFF, no network
T
ROUBLESHOOTING
W
ILL NOT PAIR INITIALLY
• Radio interference is present at the desired location.
1) Relocate the ZigBee receiver,
2) Select a different location for the switch, or
3) Add a ZigBee repeater to the system.
L
OSS OF CONNECTION AFTER PAIRING
• Make sure ZigBee receiver is operating
• Radio environment may have changed:
1) Force rejoin to possibly find a better radio path or
2) Apply radio interference solutions above.
A ' LED
PPLIANCE DOESN T TURN ON WHEN ON THE SWITCH IS
• Make sure the attached appliance is turned ON.
• Make sure the appliance can be controlled via the AC
supply. Appliances with "soft" on/off buttons cannot be
turned on by turning the AC supply ON.
S ' ON
WITCH DOESN T TURN WHEN APPLIANCE SWITCH IS TURNED OFF
THEN BACK ON
• Make sure the appliance is working by plugging the
appliance into an outlet and using the on/off switch.
• Make sure the appliance on/off switch starts in on state.
• Make sure the appliance on/off switch can be monitored,
e.g., switch is not behind a transformer or a "soft" switch,
CCFL can be monitored, etc.
BB
LG
DG
MN
DR
ON
Version 2