Thermador DWHD771W Series Use And Care Manual page 12

Remote start button
If the dishwasher is connected to the home network, you
can activate the dishwasher's remote control.To do so,
press the remote start button
If the dishwasher has not yet logged into Home Connect,
perform automatic network login
remote start button
`
Observe the Home Connect documents supplied.
Notes
To remotely control the dishwasher, the remote start
▯
button must be activated.
`
The remote start button
▯
process is complete.
Opening the door deactivates remote control.
▯
If the connection to the router fails,
▯
display.
12
.
`
by pressing the
''
.
goes out when the login
`
flashes on the
|
Wi-Fi without a connection to the Home
Connect server ƒ
You can use the Home Connect App to disconnect from
the Home Connect server.
The appliance is then locally connected to your mobile
device without any connection to the Home Connect
server.
Note: If you did not deactivate the connection to the
Home Connect server, check your Internet connection.
Remote diagnostics
Customer Service can use remote diagnostics to access
your appliance if you contact them. In the display window
you will see . Confirm Customer Service access
H '†
using the setting button +
Note: You can switch off remote diagnostics using the
ON/OFF switch ( or deactivate Customer Service
access in the Home Connect app.
W i - F i w i t h o u t a c o n n e c t i o n t o t h e H o m e C o n n e c t s e r v e r
.
P