Table of Contents
Advertisement
CONNECTING THE POWER CORD
Insert the power cord into the socket on the rear of the printer.
1
Connect the other end of the power cord to an outlet.
2
Power for the printer is turned on automatically.
Do not connect the printer to other than a local voltage outlet. Plugging the printer
into an incompatible power supply may cause extensive damage.
After the printer turned on, go to "INSTALLING THE PRINTER HEADS AND INK
TANKS" on page 14.
HOW TO SHUT OFF POWER
Turn off the power by pressing the power button and ensure
1
that the power lamp is extinguished.
Unplug the power cord from the outlet.
2
Be sure that the plug in the outlet is readily accessible to all persons. Power is
present in the product even if the power button is off in order to maintain good
print quality.
To completely shut off the power, first turn off the power using the power button.
Then unplug the power cord, after first ensuring that the carriage has returned to
its home position on the right side of the printer and the green power lamp has
been extinguished. However, the printer should be turned on promptly,
otherwise blocking of the print heads or drying out of the ink tanks may occur.
When no print head is installed, the printer cannot be turned off by pressing the
power button.
12
Advertisement
Table of Contents
