Download Print this page

Harbor Freight Tools 90681 Assembly And Operating Instructions

Icicle christmas lights

Download this manual

ICICLE CHRISTMAS LIGHTS

9 0 6 8 1

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Page 2 Dress properly. Do not wear loose clothing or jewelry as they can be caught in the Christmas Lights during installation. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. Use eye protection. Always wear ANSI approved impact safety goggles during installation. SKU 90681 Page 2...
Page 3 It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SKU 90681 Page 3...
Page 4 Unpacking When unpacking, check to make sure all of the parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Christmas Light Specific Warnings Warning! Pay particular attention to hanging the Christmas Lights completely out of reach of children to avoid risk of burns, electric shock, or injury.
Page 5 (that hold the lamp in) and gently pulling out the old lamp. After you fully insert the new lamp into the old base, bend the wires back up on each side so that they touch the contacts in the lampholder. SKU 90681 Page 5...