Using The Drawing Tools; Finding Entries; Editing Entries; Selecting An Area - Sharp IQ-8920 Operation Manual

Using the The drawing tools add versatility and capability to
drawing creating graphics with the unit. The tools are selected
from the MODIFY menu.
Press (m) and touch 1-1.
The MODIFY menu appears.
I USE ERASER
Finding Entries are saved in the order that they are stored, and
entries
are displayed using (s) or (NEXT) from the initial
blank page screen.
Editing 1. Display the entry you want to revise using the procedure
entries
above.
2 .
Touch Im] .
The drawing page is displayed.
3 .
Make any desired changes.
Press (i%iFF)
The revised drawing is now stored.
Selecting You can select a section of a drawing for copying,
an area
deleting, and other operations.
1.
Make sure you are on the drawing page. Press (m],
touch I-1, and select USE AREA TOOLS.
S S S 1
E R A E R T H I C K N E
PATTERN
-
L-Default drawing setting.
Selects thin, thick, or "brush"
drawing strokes.
Selects a thin or thick eraser.
Selects a black, gray, or white line
pattern (white is equivalent to an
r
eraser).
on) or freestyle (ruler off).
Converts the touch pen to an
eraser.
delete.
Deletes a selected area, single
entry, or all Scrapbook entries.
for the menu item.